Batch intake and recall
Batch intake is for full cylinders back from the filler, or filled in your own yard. They wait in quarantine at the yard. You scan the cylinders in one batch, type the batch number, fill date and expiry once, and release them all to full stock in one step.
Batch recall traces a batch. It lists every cylinder that carried it, who has each one now and who had it before, even after the cylinders have been refilled with a new batch.
What you can do
Section titled “What you can do”- Hold full cylinders in quarantine: cylinders you receive count in the yard but aren’t offered for loading until you release them.
- Scan a batch: type or scan serials in the office, or scan them with a phone’s camera in the yard. Both see the same batch as it fills up.
- Check against the paperwork: Bottle counts what you scanned against the number on the filler’s paperwork.
- Release a batch: set the batch details on every cylinder and put them in full stock in one step.
- Trace a batch: see who holds its cylinders now and who held them before, and download it as a CSV.
Before you start
Section titled “Before you start”Batch intake and recall are part of Assets, which Bottle must switch on for your business. You need at least one product set to Track each cylinder.
Reading serials with the phone’s camera needs Read cylinders with the camera, which Bottle switches on for your business once your cylinders have been tested. Without it, the phone has a box to type serials in, and Batch intake in the office says “Read cylinders with the camera is off. Ask Bottle to switch it on.”
Who can use it
Section titled “Who can use it”| What | Roles |
|---|---|
| The quarantine switch | Owner, Admin |
| Batch intake and Batch recall in the office | Owner, Admin |
| Adding serials to an open batch on the phone | Owner, Admin, and a driver with Allow stock takes under Users |
| Starting a batch, changing its details and releasing it on the phone | Owner, Admin |
A driver can take out only the serials they added.
Switch on quarantine
Section titled “Switch on quarantine”- Open Settings → Assets.
- Under Quarantine, switch on Full cylinders go into quarantine before full stock. It saves straight away.
With it on, full cylinders of a tracked product that you receive in Record stock, from a supplier or back from refill, go into quarantine at that yard. Record stock asks for no batch details and says “These go into quarantine at the yard. Enter the batch details when you release them from Batch intake.”
Quarantined cylinders count in the yard’s stock. They aren’t offered for loading. The Asset register and each cylinder’s page show In quarantine.
With it off, full cylinders go straight into full stock, and Record stock asks for the batch details as they come in. See Tracked cylinders in Record stock.
Release a batch in the office
Section titled “Release a batch in the office”The batch card groups the scanned cylinders by where each one is now, so you can see what releasing does to each:
- In quarantine: released to full stock.
- Empty at this yard: filled here and put in full stock.
- Not in the register: added to the register at the yard.
- At a supplier: brought into the yard.
- Already has this batch: nothing to change.
- Open Asset register → Batch intake. In quarantine lists what is waiting by product and yard, how many and for how long.
- Press Start batch on a line, or choose the Yard and Product yourself. If a batch is already open there, from the office or a phone, you join it. Being scanned lists every open batch, with Open on each.
- On the batch card, type the batch details your cylinder details ask for, such as Batch number, Fill date and Expiry date. Expiry fills in from the fill date and the product’s shelf life, and you can change it. Type Cylinders in this batch from the filler’s paperwork.
- Scan or type each serial into the box and press Enter. The count shows against the paperwork, such as “8 of 10”, and says “All 10 scanned” when they match. Serials added from a phone appear as they arrive, tagged From phone with the person’s name.
- Deal with any cylinder listed as needing action, such as 1 cylinder needs action: another product, a cylinder recorded elsewhere, one that is lost, faulty or retired, or one not recorded as full or empty. Press Take out on each.
- Press Release 10 cylinders to full stock (the button counts them). If something is in the way, the button says what, such as Take out 1 cylinder first.
If the count differs from the paperwork, or a cylinder is already in full stock, Bottle asks Check before releasing first. Choose Release anyway or Go back and check. It never goes ahead without asking.
Releasing sets the batch details on every cylinder listed and puts them in full stock at the yard. Their earlier batch stays in each cylinder’s history. See the batch in the register opens the Asset register filtered to it.
A batch left untouched for 7 days is removed. Its cylinders stay in quarantine.
Scan a batch with a phone
Section titled “Scan a batch with a phone”On iPhone or Android, open More → Stock takes. The Batch intake card lists the open batches. It shows only for a business using Assets.
- Open a batch. Owners and admins can also start one from what is in quarantine.
- Press Scan with camera and point the camera at the serial. Bottle reads printed and stamped text and barcodes on the phone, with no signal needed. A good read gives a tap and a short sound. A cylinder still in view isn’t added twice.
- Or type a serial in the box and press Add. The box is always there.
Each serial shows who added it: You, From phone or From office with their name.
A reading that doesn’t match a cylinder Bottle expects at the yard is never added by itself. Bottle shows, for example, “C999999 isn’t expected at Chertsey yard” with Add C999999 or Type it instead. A reading you turn down isn’t asked about again.
The camera asks for permission the first time. “The camera reads serial numbers. No photos or video are kept.” If camera access is off, the phone says “Camera access is off. Turn it on in Settings, or type the serials.” with Open Settings.
With no signal, the phone keeps the serials and sends each one once when it has signal. Until then they show Waiting to send.
Owners and admins can set the batch details and release from the phone, with the same Check before releasing question. Drivers see “The office releases the batch once every cylinder is scanned.”
When a quarantined cylinder goes out
Section titled “When a quarantined cylinder goes out”Drivers are warned, never stopped. If a driver records a quarantined cylinder going out at a door, the app says “C431108 is in quarantine. Ring the office before you hand it over.” The driver decides whether to hand it over.
If it goes, it appears in Needs checking as Went out from quarantine. Press Check cylinder, check its batch and expiry, add a note if you like, then press Mark as checked.
Batch recall
Section titled “Batch recall”- Open Asset register → Batch recall.
- Type a batch number, or any cylinder detail such as a serial number, under Batch or serial number, then press Find cylinders.
The summary counts the Cylinders found (and how many were refilled since), cylinders With customers now, In yards or on vehicles now, and Customers before, who had one and gave it back.
- Held now: cylinders still carrying the batch, grouped by who has them, customers first, with the date since.
- Held before: everyone who had the cylinders while they carried the batch, with from and to dates. A cylinder refilled since says, for example, Refilled, now F900/1302. Who has had it since the refill isn’t listed against the old batch.
Customers and cylinders link to their pages. Download CSV gives one line per holding: Serial number, Product, Detail, Value, Still carries this, Carries now, Now or before, Held by type, Held by, From and To.
If nothing has carried what you typed, Bottle says so and lists Close matches to choose from.
The page address holds the search, so you can share the link with another owner or admin. Searching a batch number in Bottle’s search box also opens Batch recall.
Questions
Section titled “Questions”Do quarantined cylinders count in my stock? Yes. They count in the yard’s stock, but rounds don’t load them until they are released.
What if the filler’s count and my scan don’t match? Release asks first, showing both numbers. Check the paperwork, or release anyway.
Can an empty cylinder at the yard go into a batch? Yes, for a batch you filled yourself. Releasing fills it and puts it in full stock.
Does a refill hide a cylinder from an old batch’s recall? No. The cylinder stays under Held before for that batch.
If something goes wrong
Section titled “If something goes wrong”| Problem | What to do |
|---|---|
| “Quarantine is off. Full cylinders you receive go straight into full stock.” | Switch on quarantine under Settings → Assets, if you want cylinders held. |
| “The batch details didn’t save, so nothing was released. Try again.” | Check your connection and press release again. |
| “A serial didn’t reach the batch. Check the list, then add or take it out again.” | Check the list against the cylinders, then add the missing serial again. |
| “C999999 isn’t expected at Chertsey yard” | Check the serial on the cylinder. Press Add C999999 if it is right, or Type it instead. |
| “Camera access is off. Turn it on in Settings, or type the serials.” | Press Open Settings and allow the camera for Bottle, or type the serials. |
| “This phone can’t read serials with the camera. Type them instead.” | Type the serials in the box. |
| “Read cylinders with the camera is off. Ask Bottle to switch it on.” | Ask Bottle to switch on Read cylinders with the camera. Until then, type the serials. |
| “No cylinder has carried F900/12.” | Check the batch number, or choose one of the Close matches. |
| “That batch isn’t open any more. It was released, removed, or left unused for 7 days.” | Start a new batch from In quarantine. |
| “You can only take out cylinders you added. Ask the office to take this one out.” | Ask an owner or admin to press Take out on that serial. |
| “A batch holds up to 1000 cylinders. Release this batch, then start another for the rest.” | Release the batch, then start another for the rest. |