Work reports
A work report is a numbered record of a visit. The driver answers your checks for each cylinder, the customer signs, and Bottle emails the customer the report as a PDF when the stop is recorded.
You choose the job types, the checks, what drivers must record, who gets the report and what the customer agrees to. Bottle numbers each report once and emails it once, even if the driver’s phone sends the stop again.
What you can do
Section titled “What you can do”- Set the job types: such as Install, Refill, Return and Service, each chosen from what went through the door.
- Set the checks: such as Condition, Gauge and Leaks, each required or optional.
- Choose what drivers must record: the customer’s signature and printed name, the driver’s signature, and the purchase order number.
- Choose who gets it: the main contact, everyone on the account, or who the driver chooses.
- Carry on your numbering: start from the number after your last paper report.
- See it on the order: view the PDF, print it or send it again.
Before you start
Section titled “Before you start”Work reports are part of Assets, which Bottle must switch on for your business. Work report shows in Settings under Feature settings while Assets is in use.
Work reports are off until you switch on Send work reports.
Who can use it
Section titled “Who can use it”| What | Roles |
|---|---|
| Work report settings | Owner, Admin |
| Checks and signature at the door | Driver, on iPhone and Android, and on the web |
| The work report on an order, View PDF, Print, Resend | Owner, Admin |
| Finishing a report in Needs checking | Owner, Admin |
Set up work reports
Section titled “Set up work reports”Open Settings → Work report. A starter set chosen under Settings → Assets fills in the job types, checks and statements for you.
- Switch on Send work reports. It saves straight away.
- Under Job types, add, change or remove the jobs you do. For each, choose what it is Use for:
- Full delivered, no empty back
- Full delivered, empty back
- Empty back, nothing delivered
- Equipment serviced
- Driver’s choice only: never picked by Bottle. The driver chooses it.
- Under Checks for each cylinder, add, change or remove checks. Tick Driver must answer to finish the stop to make one Required. Otherwise it is Optional.
- Under Driver must record, tick what every report needs:
- Every required check, OK or Problem: on to start with. On, the driver can’t finish the stop until each Required check is marked. Off, no check holds the driver up, but a Problem still needs a note.
- Serial, batch and expiry for each cylinder: on to start with. For each serial-numbered cylinder handed over, the driver is warned when it has no serial, or when a detail you require on a full cylinder isn’t recorded, such as “No Batch number recorded for C500110. The office will check it.” They can carry on. A cylinder missing a detail holds the report in Needs checking, with the gap listed, such as “No Batch number recorded for C500110”. A cylinder with no serial waits there to be named instead, and the report goes as usual.
- Customer’s signature and printed name
- Driver’s signature: off to start with. Every report carries the driver’s name and the time.
- Customer’s purchase order number: off to start with.
- Under Sending and numbering, choose:
- Email reports to: Customer’s main contact, Everyone on the account, or Driver chooses at each stop.
- Send a work report for: Stops with a serial-numbered cylinder, or Every stop.
- Next report number: carry on from your last paper report. It can’t be set at or below a report already issued.
- Under What the customer agrees to, type one statement per line. They are printed above the signatures.
- Press Save work report settings. Job types and checks save on their own, in their own dialogs.
Removing a job type or check doesn’t change reports already sent.
A report is made only at a customer’s stop. Never at a yard, or at either end of a move between yards.
At the door
Section titled “At the door”A stop that gets a work report has a Checks and signature step. It comes after the counts and Record the cylinders, and before payment and proof of delivery. It works the same on iPhone, Android and the web.
- Equipment to service: on a service visit, a card for each item first, with Done and Not done. An item done takes the checks. An item not done takes a Reason and a Note. See At the service visit.
- A card for each cylinder: its serial number, or a line such as “2 × 2 litre oxygen” where there is none, with the product and Delivered or Collected.
- Job type: picked from what went through the door. The driver can change it from your job types.
- Serial, batch and expiry: with Serial, batch and expiry for each cylinder ticked, a warning under any cylinder handed over without its serial or a required detail. It never holds the driver up.
- Checks: each check with OK and Problem, on delivered cylinders and on collected cylinders with a service job. Problem asks for a note under Problem with the check, and Add a photo. Up to 20 photos can be added at each stop.
- Customer signs: your statements show above it. Then Customer’s printed name.
- You sign: only when your settings ask for the driver’s signature.
- Purchase order number: only when your settings ask for it. It starts with the order’s own reference.
- Email the report to: starts as your settings say. With Driver chooses at each stop, the driver picks the contacts. Add an email address adds up to 3 more for this report. They are never saved to the customer.
Next waits until everything your settings require is done. One line says what is left, such as “Mark Leaks OK or Problem on C500110 to finish this stop.”
Once the customer has signed the report and given their name, proof of delivery shows “Signed by Sam Patel on the work report.” The same signature proves the delivery.
Everything entered at an unfinished stop stays on the phone, or in the browser, if the driver closes the stop or the app, and comes back on the step they left. Start again clears it, after asking.
If a stop reaches Bottle without something your settings require, the stop is still recorded. The report is saved without a number and waits in Needs checking.
The PDF
Section titled “The PDF”Each report is an A4 PDF with:
- Your logo or business name, Work report with its number, and the date and time.
- Customer: name, address, contact and phone, and the account number when account numbers are on and Work reports is ticked under Print the account number on.
- Order: order reference, purchase order number and report number.
- Cylinders: each serial and product, its details such as batch number, fill date and expiry, the job and a summary of the checks. Only a problem shows in red. Collected cylinders say Collected.
- Equipment serviced: on a service visit, each item with its plan and details, Done or Not done with why, when it is Next due, and a summary of its checks.
- Additional equipment: anything delivered that isn’t a cylinder, such as masks.
- Notes: the driver’s note at the stop.
- What the customer agreed to, the customer’s signature with printed name and time, and a box with your business name, the driver’s name and the time. The driver’s signature shows only when it was recorded.
- Photos: problem photos at the end, numbered. The check says “See photo 1.”
- A footer with your name, address, phone and email, and “Keep this report with your service records.”
The email
Section titled “The email”Each numbered report is emailed once, with the PDF attached, to who it is for, plus any address the driver typed. Each address gets one email about the stop:
- An address that gets the delivered email gets it with the PDF attached. The subject says what happened, such as “Delivered: your gas from Thameside Gas, with work report 12”, “Collected: your cylinders from…”, “Delivered and serviced by Thameside Gas: work report 12” or “Service completed by Thameside Gas: work report 12”. When only part of the order was delivered, it reads “Part of your order from Thameside Gas, with work report 12”.
- An address that only gets the report, such as one the driver typed, gets the report on its own, with a subject that says what happened. It says what happened and when, such as “Thameside Gas delivered on” the day, then “The work report is attached as a PDF.”
On a service visit, the email lists each item, such as “Regulator R100: serviced. Next due December 2027.” or “Regulator R200: not serviced, item not there.”
A service visit always gets a report while work reports are on, even with Send a work report for set to Stops with a serial-numbered cylinder and nothing handed over.
The time in the email and the PDF is when the stop was recorded, in UK time.
The report goes whether Delivery updates is on or off under Customer emails. That switch decides only whether the delivered email goes too.
It isn’t sent for an order with a delivery partner, for a report that isn’t finished, or for a stop that was undone. If the report can’t be made into a PDF, it shows Not sent on the order, Bottle’s support team is told, and the delivered email still goes on its own. If nobody it should go to has an email address, it shows Not sent on the order.
A report finished later in Needs checking is emailed on its own, without the delivered email.
On the order
Section titled “On the order”An order with a report has a Work report section, on the order page and on the order opened from Rounds or a customer. It shows the number, Date and time, Driver, Job, such as “3 cylinders: 2 refilled, 1 collected”, and any Purchase order number.
The status says where the report stands:
- “Emailed to orders@… at 12:14”, with the date if it went on an earlier day.
- “Waiting to send”.
- “Not sent: no email address on the account. Use Resend to type one.”
- “Not sent: the email failed. Use Resend to try again.”
- “Incomplete: finish it in Needs checking”, with a link.
- “Cancelled: the delivery was undone”.
Each resend is listed under it, such as “Resent to orders@… by Dave Bennett on 16 Nov 2026, 12:40”.
- View PDF opens the report in a new tab.
- Print opens your browser’s print dialog without leaving the order.
- Resend lists the customer’s contacts and any address the driver added, with the ones it went to ticked. Type Another email address if you need one. It isn’t saved to the account. Press Resend work report. The same PDF goes again. The report, its number and its status don’t change.
Resend shows once a report has been sent, has failed, or had nobody to send to. A report can be resent up to 10 times a day, and your business can resend to up to 100 addresses an hour.
Questions
Section titled “Questions”What if the driver’s phone sends the stop twice? The report keeps one number and goes once. The customer gets one email.
What happens when a stop is undone? The report is cancelled and keeps its number. If the stop is delivered again, the report keeps the same number and isn’t sent again.
Can the office add a signature? No. See Reports missing a signature.
Does every stop get a report? Only customers’ stops that Send a work report for covers, while Send work reports is on.
If something goes wrong
Section titled “If something goes wrong”| Problem | What to do |
|---|---|
| “Turn on Assets to send work reports.” | Press Go to Assets settings and switch on Use Assets. |
| “Type a whole number, 1 or more.” | Type the next report number as a whole number. |
| “Settings didn’t save. Try again.” | Check your connection and press Save work report settings again. |
| Driver sees “That signature can’t be sent. Clear it and sign again.” | Press Clear and sign again. |
| Driver sees “You can add up to 20 photos at each stop. Remove one to add another.” | Remove a photo before adding another. |
| The order says “Incomplete: finish it in Needs checking” | Open Needs checking and press Finish report. |
| The order says “Not sent: no email address on the account. Use Resend to type one.” | Press Resend and type an address, or add one to the customer. |
| “You can have up to 50 job types. Remove a job type to add another.” | Remove a job type you no longer use, then add the new one. |
| “You can have up to 50 checks. Remove a check to add another.” | Remove a check you no longer use, then add the new one. |
| “Work report 41 has already been issued. Set the next number to 42 or higher.” | Type a Next report number above the last report issued. |
| “This report has been resent 10 times today. Try again tomorrow.” | Resend it tomorrow. |
| “Work reports have been resent to 100 addresses in the last hour. Try again in an hour.” | Wait an hour, then press Resend again. |
| “This report is still waiting to send. Check again in a minute.” | Wait a minute and refresh the order. Its status then says whether the report went. |